The Strategic Review by Spring 1975

Author:Spring 1975
Format: epub

2 0 Wandering Monster (see Vol. Ill, D&D), check again immediately to see what lies ahead so direction of monster's approach may be determined. TABLE II. DOORS’: Location of Door: Space Beyond Door Is: Die Result Die Result 1 , 4 Left 12 Parallel passage or 10'xlO’ room if door straight ahead 5 , 8 Right 3 Passage straight ahead 9,12 Ahead 4 Passage 45 deg. ahead/behind 5 Passage 45 deg. behind/ahead 6-12 Room (go to TABLE V.) •If no room is beyond a door check again on TABLE 1. 30' after passing by or through a door. TABLE III. SIDE PASSAGES: Die Result Passage Width: 1 left 90 degrees Die Result 2 right 90 degrees 1-7 10’ 3 left 45 degrees ahead 8-10 20’ 4 right 45 degrees ahead 11 30’ 5 left 45 degrees behind 12 5’ 6 right 45 degrees behind 7 left curve 45 degrees ahead 8 right curve 45 degrees ahead 9 passage “T‘s” 10 passage “Y's” 11 four-way intersection 12 passage “X's” (if present passage is horizontal or vertical it forms a fifth passage into the "X”) TABLE IV. TURNS: Die Result (check on width of passage on TABLE III.) 1-4 left 90 degrees 5 left 45 degrees ahead 6 left 45 degrees behind 7-10 right 90 degrees 11 right 45 degrees ahead 12 right 45 degrees behind TABLE V. CHAMBERS AND ROOMS: (Roll for Shape and Size, Shape and Size: then Exits, then Contents Die Chamber Shape and Area Room Shape and Area 1 Square, 20' x 20' Square, 10' x 10' 2-4 Square, 20' x 20' Square, 20' x 20' 5 Square, 30' x 30' Square, 30' x 30' 6 Square, 40' x 40' Square, 40’ x 40' 7 Rectangular, 20' x 30' Rectangular, 10' x 20' 8,9 Rectangular, 20' x 30' Rectangular, 20' x 30' 10 Rectangular, 30' x 50' Rectangular, 20' x 40' 11 Rectangular, 40' x 60' Rectangular, 30' x 40' 12 Unusual Shape and Area, see sub-table below -Unusual Shape and Size (Roll Separately for Shape and Size): Die Shape Size 1-3 Circular about 500 sq. ft. 4,5 Triangular about 900 sq. ft. 6,7 Trapezoidal about 1,300 sq. ft. 8,9 Odd-shaped* about 2,000 sq. ft. 10 Oval about 2,700 sq. ft. 11 Hexagonal about 3,400 sq. ft. 12 Octagonal roll again and add result to 11 above (if another 12 repeat the process, doubling 11 above, and so on) •draw what shape you desire or what will fit the map Exits: Number, Location, and Direction (Passages in Chambers, Doors in Rooms) Die Room Area Number of Exits 1 up to 600' 1 1 over 600’ 2 2 up to 600' 2 2 over 600’ 3 3 up to 600' 3 3 over 600’ 4 4 up to 1200' 0 * 4 over 1200’ 1 5 up to 1600' 0 * 5 over 1600’ 1 6 any size 1-4, roll to determine Die ** Location Direction (If a Door use TABLE II instead) 1-5 opposite wall straight ahead 6-8 left wall straight ahead 9-11 right wall straight ahead, 20' wide 12 same wall 45 deg.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.